TryBuildCalcTopsoil Bags Calculator (Exact Bag Count)
Find your exact topsoil bag count instantly.
🕒 Last updated: September 19, 2026
Inputs
ℹ️For an irregular area, measure its overall rectangular footprint, or switch to By Total Area above.
ℹ️Typical for Screened Topsoil: 2-4 in.
ℹ️General-purpose topsoil screened to remove rocks, roots, and debris. A common choice for general fill and grading work, and can also be used as a thinner topdressing layer over an existing lawn.
Delivery
ℹ️0.75 cu ft is a common standard US retail bag; 25-50 L covers common UK/AU bag sizes. Topsoil bags run smaller than mulch bags since topsoil is much denser.
Cost
Topsoil Needed
23 bags
17.25 cu ft total (0.488 m³)
Fill Area
60 sq ft
5.57 m² at 3" (7.6 cm) deep
Volume
Bare volume: 15 cu ft (0.556 cu yd / 0.425 m³)
Order volume (+15% settling/waste): 17.25 cu ft
0.639 cu yd / 0.488 m³ / 488.5 L
Bags
Bag size: 0.75 cu ft (21.2 L)
Bags needed: 23
Each bag covers ≈3 sq ft at 3" deep.
Screened Topsoil
General-purpose topsoil screened to remove rocks, roots, and debris. A common choice for general fill and grading work, and can also be used as a thinner topdressing layer over an existing lawn.
Typical depth range: 2-4 in (general practice guidance, not a fixed standard)
Assumptions Used
Order volume adds a 15% settling/waste allowance on top of the bare fill volume (area × depth), covering typical settling and compaction once topsoil is watered in and worked. Bag sizes are stored as a canonical liter volume so both common US cu-ft retail bags and common UK/AU litre bags can be selected from the same list; results are always shown in cu ft, cu yd, m³, and litres together. Bulk/loose figures assume a ≈1 m³ (≈35 cu ft) bulk/FIBC bag as an additional reference figure — many US suppliers instead sell bulk topsoil loose by the cubic yard, which is shown directly. This calculator estimates material quantity only — it does not verify existing grade, drainage, or soil testing/amendment needs.
Diagram simplified for clarity (not to scale) — fill area shown schematically, topsoil depth shown proportionally.
Looking for the verification checklist, reference tables, tips, or common mistakes?See the complete Topsoil Calculator.
Exact topsoil bag count
Buying too few bags means a second trip; buying too many wastes money on material you didn't need — this page defaults to a common 0.75 cu ft US retail bag size and Bagged delivery.
This page defaults to a 10 ft × 6 ft area at 3 in deep — edit the inputs and bag size above to match your actual project and local bag sizes.
Topsoil Calculator Formula: How Is It Determined?
Fill area and depth combine into a bare volume, a settling/waste allowance is added, then the order volume converts to either a bag count or a bulk quantity.
Step 1 — Fill Area
By Dimensions: Area = Length x Width
By Total Area: Area = entered value (converted to sq ft if entered in m²)
Either enter a rectangular area's length and width, or enter its total area directly — useful for an irregular lawn, bed, or plot where length x width doesn't apply.
Step 2 — Bare & Order Volume
Bare Volume = Area x Depth
Order Volume = Bare Volume x (1 + 15% settling/waste)
The 15% allowance covers typical settling and compaction once topsoil is watered in and worked — a bit higher than a loose organic mulch's allowance, since topsoil compacts more.
Step 3a — Bagged
Bags = ceil(Order Volume / Bag Volume)
Bag volume is stored as a canonical liter figure internally, so both cu-ft-sized (US) and litre-sized (UK/AU) bags come from the same preset list, or enter a custom bag size in either unit.
Step 3b — Bulk / Loose
Order Volume shown directly in cu yd and m³
Bulk Bags (≈1 m³ each) = ceil(Order Volume in m³)
Bulk topsoil is most often bought loose by the cubic yard (common in the US) — the bulk/FIBC (~1 m³) bag count is shown as an additional reference figure, since that's a common bulk-bag size in the UK and Australia.
Worked Example
This example walks through your current inputs above, using the same steps as the Formula section.
Input Values Used
| Input | Value | Why it is used |
|---|---|---|
| Fill Area | 60 sq ft (5.57 m²) | Sets bare volume |
| Depth | 3 in (7.6 cm) — Screened Topsoil | Sets bare volume and depth-advisory check |
| Delivery Method | Bagged | Sets bag count or bulk quantity |
| Bag Size | 0.75 cu ft (≈21 L) — standard US bag — 0.75 cu ft (21.2 L) | Sets the bag-count divisor |
Step 1 & 2 — Volume
| Calculation | Result |
|---|---|
| Bare Volume = 60 sq ft x (3/12) ft | 15 cu ft (0.556 cu yd / 0.425 m³) |
| Order Volume = Bare Volume x (1 + 15%) | 17.25 cu ft (0.639 cu yd / 0.488 m³) |
Step 3 — Bags
| Calculation | Result |
|---|---|
| Bags = ceil(17.25 / 0.75 cu ft per bag) | 23 bags |
Figures above are rounded for display; the bag/bulk count is always calculated from full, unrounded values, so it can occasionally look off by one bag if you redo the division yourself using the rounded figures shown.
Therefore, a 60 sq ft area at 3" deep needs approximately 23 bags of screened topsoil.
Related Calculators
Disclaimer: This calculator provides approximate results for planning and estimation purposes only. Actual requirements may vary based on site conditions, materials, workmanship, and local building regulations. Always consult a qualified engineer, architect, or construction professional before making final decisions.