TryBuildCalcQuintal to Tonne Converter(Quintal to kg, Tonnes & Volume)
Convert quintals to tonnes and kg.
🕒 Last updated: Aug 21, 2026
Conversion Inputs
Moisture affects weight-to-volume conversion. Wet aggregate weighs more for the same volume.
✏️ Type any value in any field below — all other units update instantly
Material: 20mm Crushed Granite | Density: 1,600 kg/m³ | Moisture: Dry
1 m³ = 1,600 kg = 1.6 t = 0.353 brass = 1.764 US tons
What This Means in Practice
10 quintals (in) of 20mm Crushed Granite weighs 1,000 kg and occupies approximately 0.625 m³. That is about 0.1 selected truck loads, so plan for 1 load(s).
0.625 m³
22.072 ft3 / 0.2207 brass
1,000 kg
1 t / 1.1023 US tons
1 load(s)
0.1 exact loads at 10T capacity
Aggregate Conversion Visualizations
Relative Unit Scale
Material Density Comparison
Truck Load Visualizer
Convert metric quintals to tonnes
One metric quintal equals 100 kilograms, and ten quintals equal one metric tonne.
Material selection only affects the derived volume units.
- Starts with 10 quintals.
- Equivalent to 1 metric tonne.
- Also reports material volume and loads.
How Does the Aggregate Unit Converter Work?
1. Volume to volume
Target volume = Source volume x source-to-m³ factor / target-to-m³ factor
1 m³ = 35.3147 ft³ = 1.30795 yd³ = 1,000 litres = 0.3531 brass
These geometric conversions are fixed and do not depend on material.
2. Weight to weight
Target weight = Source weight x source-to-kg factor / target-to-kg factor
1 tonne = 1,000 kg; 1 quintal = 100 kg; 1 US ton = 907.185 kg; 1 UK ton = 1,016.047 kg
US short tons, metric tonnes, and UK long tons are different units and should never be treated interchangeably.
3. Volume to weight
Weight (kg) = Volume (m³) x Bulk density (kg/m³) x Moisture factor
Dry, damp, and wet factors are 1.00, 1.10, and 1.22.
4. Weight to volume
Volume (m³) = Weight (kg) / (Bulk density x Moisture factor)
The selected material density determines how much physical volume a known weight occupies.
5. Bags and truck loads
Bags = ceiling(total kg / bag kg)
Exact loads = total kg / truck capacity kg
Planned loads = ceiling(exact loads)
Bags and planned loads round up because partial delivery units cannot normally satisfy the order.
Worked Conversion Examples
The converter updates all fields instantly when you type in any unit above. The examples below show how the arithmetic works for three common real-world scenarios — so you can verify results and understand what each conversion step does.
Live — based on your current inputs
10 quintal of 20mm Crushed Granite (density 1,600 kg/m³, dry condition) converts to:
| Unit Group | Unit | Converted Value |
|---|---|---|
| Volume | Cubic metres (m³) | 0.625 m³ |
| Cubic feet (ft³) | 22.072 ft³ | |
| Cubic yards (yd³) | 0.8175 yd³ | |
| Litres | 625 litres | |
| Brass (IN) | 0.2207 brass | |
| Weight | Kilograms (kg) | 1,000 kg |
| Metric Tonnes (t) | 1 t | |
| Quintals (IN) | 10 quintal | |
| US Short Tons | 1.1023 US tons | |
| UK Long Tons | 0.9842 UK tons | |
| Pounds (lb) | 2,204.62 lb | |
| Practical | 25 kg bags | 40 bags (rounded up) |
| 50 kg bags | 20 bags (rounded up) | |
| Bulk bags (850 kg) | 2 bulk bags (rounded up) | |
| Truck loads | 0.1 loads → 1 planned load(s) |
Scenario 1 — India (Hyderabad)
Supplier quotes 5 brass of 20mm crushed granite — how many tonnes is that?
A South Indian aggregate supplier quotes a price per brass. The structural engineer needs the quantity in metric tonnes for the project cost report. Material: 20mm crushed granite, bulk density 1,600 kg/m³, dry condition.
| Step | Formula / Substitution | Result |
|---|---|---|
| Convert brass → m³ | 5 brass × 2.83168 m³/brass | 14.158 m³ |
| Convert m³ → kg | 14.158 × 1,600 kg/m³ | 22,653 kg |
| Convert kg → tonnes | 22,653 ÷ 1,000 | 22.65 tonnes |
| Convert kg → quintals | 22,653 ÷ 100 | 226.53 quintals |
| Truck loads (10T truck) | 22,653 ÷ 10,000 | 2.27 loads → plan 3 loads |
Scenario 2 — United States (Texas)
Project specifies 15 cubic yards of pea gravel — how many US tons and metric tonnes?
A US homeowner needs pea gravel for a driveway. The project plan uses cubic yards but the supplier quotes per US ton. The owner also needs metric tonnes for comparison with an online calculator. Material: river gravel / pea gravel (20mm), bulk density 1,500 kg/m³, dry condition.
| Step | Formula / Substitution | Result |
|---|---|---|
| Convert yd³ → m³ | 15 yd³ × 0.764555 m³/yd³ | 11.468 m³ |
| Convert m³ → kg | 11.468 × 1,500 kg/m³ | 17,202 kg |
| Convert kg → metric tonnes | 17,202 ÷ 1,000 | 17.20 metric tonnes |
| Convert kg → US short tons | 17,202 ÷ 907.185 | 18.96 US tons |
| Convert m³ → brass | 11.468 ÷ 2.83168 | 4.05 brass |
Scenario 3 — United Kingdom (Birmingham)
Engineer specifies 8 tonnes of MOT Type 1 — how many bulk bags and what volume?
A homeowner receives an engineer's specification for 8 metric tonnes of MOT Type 1 sub-base. They want to know how many 850 kg bulk bags to order and what volume that represents, to verify their driveway area estimate. Material: MOT Type 1 / crusher run, bulk density 1,900 kg/m³, dry condition.
| Step | Formula / Substitution | Result |
|---|---|---|
| Convert tonnes → kg | 8 × 1,000 | 8,000 kg |
| Convert kg → bulk bags (850 kg) | ceiling(8,000 ÷ 850) | 10 bulk bags (9.41 exact, rounded up) |
| Convert kg → m³ | 8,000 ÷ 1,900 kg/m³ | 4.211 m³ |
| Convert m³ → ft³ | 4.211 × 35.3147 | 148.7 ft³ |
| Convert m³ → yd³ | 4.211 ÷ 0.764555 | 5.51 yd³ |
How the converter handles each conversion pathway
| You enter | Conversion path | Needs density? | Example |
|---|---|---|---|
| Volume (m³, ft³, yd³, brass, litres) | → all other volume units | No — fixed ratios | 5 brass = 14.16 m³ = 500 ft³ |
| Volume (any) | → all weight units | Yes — multiplies by density | 14.16 m³ × 1,600 = 22,656 kg |
| Weight (kg, t, quintal, US ton, UK ton, lb) | → all other weight units | No — fixed ratios | 1 tonne = 1,000 kg = 10 quintals |
| Weight (any) | → all volume units | Yes — divides by density | 8,000 kg ÷ 1,900 = 4.21 m³ |
Volume ↔ volume and weight ↔ weight conversions are independent of material selection. Only volume ↔ weight conversions depend on the selected material's bulk density. Selecting the wrong material only affects the cross-domain conversions — not the within-domain ones.
Converter Limitations & Assumptions
- Bulk densities are material-specific but not quarry-specific. Local material can vary by 3-8% because of source rock, grading, and particle shape. For orders above about 50 tonnes, obtain a tested density and use Custom.
- Brass is an informal Indian construction volume unit equal to 100 cubic feet or 2.83168 m³. It is not an IS or international standard unit, even though its customary definition is consistent.
- This converter uses the metric quintal of 100 kg used in India. Historical hundredweight or regional units with similar names are not supported.
- Damp factor 1.10 and Wet factor 1.22 are typical averages. Actual moisture varies with weather, source, and storage. Concrete batching should use measured aggregate moisture.
- The bulk-bag output assumes 850 kg. Suppliers may use 800 kg, 900 kg, or 1,000 kg bags, so verify the stated bag weight before ordering.
- Truck loads are calculated from payload weight only. Low-density material may fill the truck body before reaching its legal weight capacity, so also verify vehicle volume capacity.
Disclaimer: This calculator provides approximate results for planning and estimation purposes only. Actual requirements may vary based on site conditions, materials, workmanship, and local building regulations. Always consult a qualified engineer, architect, or construction professional before making final decisions.