TryBuildCalcTopsoil-Compost Blend Calculator (Simple, Lower-Cost Raised Bed Mix)
Size your topsoil-compost blend instantly.
🕒 Last updated: September 19, 2026
Inputs
Bed Dimensions
ℹ️Choose a common raised bed footprint, or pick Custom to enter your own length and width.
ℹ️Typical raised bed depth runs about 6-12 in (general practice, not a fixed standard) — shallow-rooted crops can work with less, deep-rooted vegetables benefit from more.
Soil Mix Recipe
ℹ️A simple, common raised-bed mix commonly cited as roughly 50/50 to 60/40 topsoil/compost — general practice guidance, not a fixed standard. Adjust the split below to match your own preference or supplier's guidance.
Percentages must sum to exactly 100%.
Bags & Cost Estimation
ℹ️Used to compute each component's own bag count from its own apportioned volume — pick the closest common soil/amendment bag size you'd buy.
Total Soil Mix Needed
23.47 cu ft
0.869 cu yd / 0.665 m³ / 664.5 L
Bed Size
32 sq ft
2.97 m² at 8" (20.3 cm) deep
Topsoil-Compost Blend
A simple, common raised-bed mix commonly cited as roughly 50/50 to 60/40 topsoil/compost — general practice guidance, not a fixed standard. Adjust the split below to match your own preference or supplier's guidance.
| Component | Share | Volume | Bags |
|---|---|---|---|
| Topsoil | 60% | 14.08 cu ft (0.521 cu yd / 0.399 m³) | 10 |
| Compost (blend of compost types) | 40% | 9.39 cu ft (0.348 cu yd / 0.266 m³) | 7 |
| Total | 100% | 23.47 cu ft | 17 |
Bag size: 1.5 cu ft (42.5 L) per bag — shared across all components.
Volume
Bare volume: 21.33 cu ft (0.79 cu yd / 0.604 m³)
Order volume (+10% settling): 23.47 cu ft
Assumptions Used
Total soil mix volume (bed area × fill depth, plus a 10% settling allowance) is split across your selected recipe's components by percentage share, using largest-remainder rounding so each component's displayed cu ft figure sums exactly back to the total order volume. Each component's bag count uses the same shared bag size selected above, rounded up to the next whole bag. This calculator estimates material quantity only — it does not verify soil pH, nutrient testing, or structural bed-frame design.
Diagram simplified for clarity (not to scale) — bed footprint shown schematically, soil mix layers shown proportionally to each component's volume share.
Looking for the verification checklist, reference tables, tips, or common mistakes?See the complete Raised Bed Soil Calculator.
Topsoil-compost blend volumes
A topsoil-compost blend is a simpler, generally lower-cost raised bed mix than a fully soilless recipe — commonly cited as roughly 50/50 to 60/40 topsoil/compost, general practice guidance rather than a fixed standard.
This page defaults to a 4x8 ft bed at 8 in deep with a 60/40 split — edit the inputs and percentages above to match your own preference or supplier's guidance.
Raised Bed Soil Calculator Formula: How Is It Determined?
Bed area and depth combine into a bare volume, a settling allowance is added, and the order volume is split across your chosen recipe's components by percentage share before converting each to a bag count.
Step 1 — Bed Area
Preset Bed Size: Area = Preset Length x Preset Width
Custom: Area = entered Length x entered Width (converted to ft if entered in m)
Choose a common raised bed footprint, or switch to Custom to enter your own length and width.
Step 2 — Bare & Order Volume
Bare Volume = Area x Depth
Order Volume = Bare Volume x (1 + 10% settling)
The 10% allowance covers typical settling once a fresh loose mix is watered in and worked — lighter than the Topsoil Calculator's 15% open-fill allowance, since a boxed bed doesn't need a grading waste allowance on top.
Step 3 — Component Split
Component Volume (exact) = Order Volume x (Component % / 100)
Component Volumes are rounded using largest-remainder apportionment so they sum exactly to the displayed Order Volume
Each component's share comes from your selected recipe (Mel's Mix splits into exact equal thirds; the topsoil-based blends default to an editable percentage split).
Step 4 — Bags & Cost
Component Bags = ceil(Component Volume / Bag Volume)
Component Cost = Component Bags x Price per Bag (if cost estimation is enabled)
All components share one selected bag size, applied to each component's own apportioned volume — each gets its own bag count and, optionally, its own price per bag.
Worked Example
This example walks through your current inputs above, using the same steps as the Formula section.
Input Values Used
| Input | Value | Why it is used |
|---|---|---|
| Bed Size | 32 sq ft (2.97 m²) | Sets bare volume |
| Fill Depth | 8 in (20.3 cm) | Sets bare volume and depth-advisory check |
| Recipe | Topsoil-Compost Blend | Sets each component's percentage share |
| Bag Size | 1.5 cu ft (≈42 L) — common bag — 1.5 cu ft (42.5 L) | Sets each component's bag-count divisor |
Step 1 & 2 — Volume
| Calculation | Result |
|---|---|
| Bare Volume = 32 sq ft x (8/12) ft | 21.33 cu ft (0.79 cu yd / 0.604 m³) |
| Order Volume = Bare Volume x (1 + 10%) | 23.47 cu ft (0.869 cu yd / 0.665 m³) |
Step 3 & 4 — Component Split, Bags & Cost
| Component | Calculation | Volume | Bags |
|---|---|---|---|
| Topsoil | 23.47 cu ft x 60% | 14.08 cu ft | ceil(14.1 / 1.5) = 10 |
| Compost (blend of compost types) | 23.47 cu ft x 40% | 9.39 cu ft | ceil(9.4 / 1.5) = 7 |
The Volume column shows each component's apportioned display figure (so the column sums exactly to the total); the ceil() calculation uses each component's own full-precision volume, which can very occasionally round to a different-looking pair of numbers than the Volume column while still producing the correct bag count.
Therefore, a 32 sq ft raised bed at 8" deep with the Topsoil-Compost Blend recipe needs 14.08 cu ft (10 bags) of topsoil, and 9.39 cu ft (7 bags) of compost (blend of compost types).
Related Calculators
Disclaimer: This calculator provides approximate results for planning and estimation purposes only. Actual requirements may vary based on site conditions, materials, workmanship, and local building regulations. Always consult a qualified engineer, architect, or construction professional before making final decisions.